# How to use a steamer’s trouser crease attachment Canonical page: https://everydaygarmentcare.co.uk/steamers/steamer-with-crease-attachment/ Publisher: Everyday Garment Care Steamers / How-to Match the pleat or clasp tool to your steamer, align the original trouser line and follow the model’s movement. See when board pressing gives a sharper finish. By Everyday Garment Care · Updated November 2026 ![Tailored trousers on a clip hanger beside a steamer head with an attachment]() ## Match the attachment to the steamer Check the exact model and the garment’s care label. Fit the approved attachment while the appliance is unplugged and cool. Follow the maker’s movement and use the original line as your guide. ## Identify the part and the line you want to follow Look for the full model reference on the steamer. Its instructions may call the tool a crease attachment, pleat attachment or clasp. These parts have different shapes and use different movements. Match the part to the exact steam head and look at the fitting drawing. If you are ordering a steamer for this job, confirm the chosen package contains the tool. Check the care label for both heat and steam restrictions. Look at the actual trouser finish, including any trim or lining that could be affected. If the fabric permits the method but you are unsure how it will react, test a discreet section and inspect it once dry. Use the [care symbols guide]() to check what the label allows. Decide whether the line is an existing fold down the front or a sewn seam at the side. Put the trousers on a hanger the appliance instructions allow and let the leg hang in its natural shape. Good side light helps you see a faint crease and spot a twist before adding steam. Keep the parts you are working on within easy reach. ## Fridja f1600 for an upright with a supplied crease clamp Fridja supplies a clasp with the f1600. Follow the model’s assembly sequence and fit the approved clasp before switching on. Hang the trousers on your own hanger. The hook on the pole parks the steam head, so plan a suitable hanging point for the garment separately. The f1600 manual directs a slow downward pass for general steaming, with low or high steam chosen for the fabric. Check the specific clasp guidance with Fridja if you need help placing the cloth in the tool. [Fridja f1600 model details]() · [f1600 instruction booklet](). [View on Amazon]() For several panels with room for a base ### Fridja f1600 Commercial Clothes Steamer f1600/BLK The removable 4 L tank stays in the floor unit. Its hose feeds a separate steam head, with two steam settings and a drain in the base. Good for Several steam-compatible panels when the base can stand securely and the sections can all be reached comfortably from the floor. Bear in mind Requires a clear floor position and space to store an upright appliance. The larger tank does not extend hose reach. - 4 L tank - Hose-fed head - Two steam levels - Drain valve ## Check the movement for the steamer you own **How the Tefal and Fridja attachment instructions differ** | Model and tool | Where the fabric sits | Maker’s movement | | --- | --- | --- | | Tefal IT8460G0 pleat attachment | Between the two parts of the tool | Downwards from the top | | Fridja f1000 clasp | Clasp on the seam with fabric held taut | Back and forth along the seam | Have the instructions within reach when you fit a tool for the first time. A brush or steam bonnet from the same kit serves a different purpose. If the part seems to fit but shifts or leaves a gap at the mounting point, stop and check the illustration and part reference. Avoid forcing it on or swapping it while the head is hot. ## Use the Tefal IT8460G0 attachment downwards Tefal lists a pleat attachment with the UK Pro Style Care IT8460G0. The maker’s instruction booklet calls it a crease attachment. It shows fabric going between the two parts of the tool, followed by a downward movement starting from the top. Prepare the attachment and support before heating the appliance. 1. With the steamer unplugged and fully cool, fit the attachment as the instructions show. Set up the base and hanger as directed. 2. Hang the trousers and locate the existing crease. Arrange the fabric so it lies in that line before you engage the accessory. 3. Heat the steamer as directed. Place the intended section between the two parts of the accessory and move it downwards along the line. Keep your hands clear of the steam. 4. Park the head on its cradle before changing how the trousers hang. Switch off, unplug and let the appliance cool before removing or adjusting the accessory. If the cloth starts to twist, stop and reset it. Starting a second pass on a different fold can leave two visible lines. Check the results once the fabric has settled. [Tefal IT8460G0 model and supplied tools]() · [Tefal instruction booklet](). ## Follow the Fridja f1000 instructions for its clasp Fridja gives a different method for the f1000. Its manual shows the clasp fitted to the head and the garment on the supplied folding hanger. It describes holding the garment taut, clipping the clasp onto the seam and moving it back and forth. The appliance needs to be cool and off before you fit an accessory. Follow the manual’s instructions for its heatproof glove and keep your hand away from the head and the steam path. The f1000 instructions show a seam as the point of contact. Start by checking which line you want to work on before you clip the cloth. If you need to adjust the fabric, switch the unit off and park the head on its hanger, keeping clear of any remaining steam. Fridja lists the f1000 clasp as an exact replacement part. Confirm the included accessories if ordering the steamer or check the part number with the maker if you already have one. [Fridja f1000 manual]() · [Fridja clasp compatibility](). ## Check why a pass has missed the line Trouser legs can hang unevenly if a hanger pulls on only one side. With the head safely parked and steam stopped, look along the leg and check whether the original crease still runs straight. When the fold vanishes around a twist, take the trousers off the support and realign them before starting again. Keep bulky seams, fasteners and pocket edges out of the tool unless the exact instructions and garment care allow you to work on them. A clasp or pleat tool needs the cloth to move through smoothly. If it catches on a thick area, stop and release the fabric as the manufacturer shows. Check that the tool is correctly fitted once cool. The cloth should move with the tool, without pulling the hanger or stand out of position. ## Match the finish to the garment and the job A hanging attachment helps guide steam along a small section. If the trousers need a light touch-up on an existing fold, check the line after the first pass. If the line is still faint, look for a twist, bunched fabric or a gap between the cloth and the accessory. Give damp fabric time to dry before repeating the same section. Follow the model’s instructions if steam or hot water comes from an unexpected place. A flat ironing board lets you bring the trouser seams together, support the whole leg and work a sharper line in short sections. Use that method where the care label permits it and you want a crisp, tailored result. A suitable pressing cloth can help protect a fabric prone to shine. The [trouser pressing guide]() shows how to align the original crease before applying pressure. Finish by letting the trousers hang freely until cool and dry. Give them enough room that the two legs do not bunch as the fabric settles. Switch the steamer off and follow its instructions for cooling, emptying and removing the tool. When the job is general smoothing across the thigh or seat, check the [hanging setup guide]() and use the model’s ordinary steaming method. ## Frequently asked questions ### What does a steamer crease attachment do? It holds a section of hanging fabric in the path of the steam so you can follow a crease or seam. The exact fitting and movement depend on the attachment and the steamer. ### Can I fit a crease tool to any clothes steamer? Check the full model reference and the maker’s compatibility list. Use the part made for that head and follow its fitting instructions with the appliance unplugged and cool. ### Should I move the attachment up or down the trouser leg? Follow your manual. Tefal’s IT8460G0 instructions direct a downward movement from the top. Fridja’s f1000 manual describes a back-and-forth movement along the seam with its own clasp. ### How can I avoid a second crease? Identify the existing fold in good light and support the leg so it hangs in that line. Stop steam and park the head before correcting the fabric if the tool starts following a different fold. ### Will a steamer crease tool give the same finish as an iron? It can tidy a permitted hanging seam or crease. For a long, sharply defined line, a suitable iron and board give you firm support for aligning both layers and applying pressure. **Everyday Garment Care** We research manufacturer instructions and product specifications to explain practical garment care and equipment choices. [Editorial policy]() **Affiliate disclosure.** If you buy through a product link on this page, we may earn a commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases. [How our links work]().